Bin entry stage
Open the entry door manually, push the bin into the automatic turning machine, close the door and it will turn the bin to the designated position.
html
The medical waste bin washer uses high-pressure water to wash, removes dirt from the bin with cleaning fluid, disinfects the bin with disinfectant, and rinses the bin with hot water. Cooperate with ultraviolet disinfection to achieve the purpose of cleaning the bin. With automatic turning function.
Open the entry door manually, push the bin into the automatic turning machine, close the door and it will turn the bin to the designated position.
The cleaning solution and the disinfectant solution are respectively injected through the metering pump, and the bin is cleaned and sterilized through the high-pressure water pump. There are nozzles on the side, top and bottom of the equipment to clean the bin without dead ends. At the same time, there is an ultraviolet lamp tube on the top to carry out ultraviolet disinfection on the turnover box.
After the sterilization is completed, clean the bin with high-pressure water with hot water. The hot water tank is equipped with a temperature sensor. When the temperature reaches the set temperature, the steam valve is opened to raise the temperature. When the set upper limit is reached, the valve is automatically closed.
After cleaning, the bin is automatically turned to the exit position. Open the door and take out the turnover box.
It is used for cleaning medical waste boxes, medical trash bins and medical instrument trays.
All 304 Stainless steel construction/hygienic design.
Completely customized layout/design capabilities.
Capacity depending on container size and desired output.
Can be integrated with automated drying system available.
Wash and rinse water heated via either steam or electric.
Integrated chemical dosage pumps for detergent and sanitizer chemicals.
Adjustable conveyor speeds for variable wash/rinse cycle times depending on pollution levels in containers.