Inclined loading and unloading
Open the entry door manually, push the bin into the automatic turning machine, close the door and it will turn the bin to the designated position.
html
The trash bin washer uses high-pressure water to wash, removes dirt from the bin with cleaning fluid, disinfects the bin with disinfectant, and rinses the bin with hot water. With automatic turning function.
Open the entry door manually, push the bin into the automatic turning machine, close the door and it will turn the bin to the designated position.
The cleaning solution and the disinfectant solution are respectively injected through the metering pump, and the bin is cleaned and sterilized through the high-pressure water pump. There are nozzles on the side, top and bottom of the equipment to clean the bin without dead ends.
After the sterilization is completed, clean the bin with high-pressure water with hot water. The hot water tank is equipped with a temperature sensor. When the temperature reaches the set temperature, the steam valve is opened to raise the temperature. When the set upper limit is reached, the valve is automatically closed.
The drying function can be added if needed. It is necessary to increase the U-shaped connecting conveying device between cleaning and drying.
After cleaning, the bin is automatically turned to the exit position. Open the door and take out the turnover box.
The machine can be used for cleaning medical waste bins, life trash bins, large and small caliber barrel containers.
Brush system, 360° all-round cleaning
Equipped with disinfection link
Bacterial contaminant residues are reduced by 98%
Fully automated operation - key cleaning
Can be integrated with automated drying system available.
Wash and rinse water heated via either steam or electric.
Reduce energy consumption by 80% compared with manual cleaning, water and electricity consumption is reduced